##makefile for lynx SHELL = @CONFIG_SHELL@ CDPATH = . x = @PROG_EXT@ .SUFFIXES: @SET_MAKE@ prefix = @prefix@ exec_prefix = @exec_prefix@ top_srcdir = @top_srcdir@ srcdir = @srcdir@ VPATH = $(srcdir) CC = @CC@ CFLAGS = @CFLAGS@ DEFS = @DEFS@ CPPFLAGS = @CPPFLAGS@ LINT = @LINT@ LIBS = @LIBS@ INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ LN_S = @LN_S@ ## This is the version which we are developing (or, upon release, make this ## the same). Use no dots in the name, since it must work on VMS and MS-DOS. VERSION = 2-8-4 ##this is the name of the directory the lynx source code is in. ##(e.g., lynx2-8-4, not the full path) lynxdir= lynx$(VERSION) lynxname= lynx$(VERSION) ## The 'DESTDIR' variable allows you to install the program into a different ## location, e.g., for packaging, without affecting the compiled-in pathnames. DESTDIR= @DESTDIR@ ## Where you want lynx installed bindir= @bindir@ BINDIR= $(DESTDIR)$(bindir) ## Where you want the lynx man file installed mandir= @mandir@/man1 MANDIR= $(DESTDIR)$(mandir) ## Where you want the lynx.cfg file installed libdir= @libdir@ LIBDIR= $(DESTDIR)$(libdir) ## Where you want the doc-files installed docdir= @libdir@/lynx_doc DOCDIR= $(DESTDIR)$(docdir) ## Where you want the help-files installed helpdir= @libdir@/lynx_help HELPDIR= $(DESTDIR)$(helpdir) ##set the relative location of the WWW library Implementation directory, ##from this directory ##do not set this to be an absolute path!!! WWWINC= WWW/Library/Implementation ## Path to gzip that will compress the help files. ## It will be used when --enable-gzip-help is set by configure. ## Leave *both* empty if you don't want to gzip help files. COMPRESS_PROG=@COMPRESS_PROG@ COMPRESS_EXT=@COMPRESS_EXT@ # !!!!!!!!!!! SUN resolv LIBRARY !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! # To include resolv in the LIBS="" list for SUN 3, 4 or Solaris OS, # point RESOLVLIB to that library. You need this if you get the message # "Alert!: Unable to connect to remote host" whenever you try to # access a host other than localhost and have made Lynx without it. # See the PROBLEMS file for more information. #RESOLVLIB= -lresolv # !!!!!!!!!!!!! DIRECT WAIS ACCESS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! # If you are adding direct wais access you must fill in the # location of wais.a, client.a and the standard math library, libm.a. # You can pick up the most current freeWAIS sources from # ftp://ftp.cnidr.org/pub/NIDR.tools/freewais # If you are using freeWAIS-0.202 or older, include -DDECLARE_WAIS_LOGFILES # in your SITE_DEFS. # Please put an ABSOLUTE address here if you want it to work! #WAISLIB= ../../freeWAIS-0.202/bin/client.a ../../freeWAIS-0.202/bin/wais.a /usr/lib/libm.a # !!!!!!!!!!!!! SLANG Support (For color version of Lynx). !!!!!!!!!!!!!!!! # The slang library is an alternative to curses, developed by John E. Davis # (davis@space.mit.edu). Version 0.99-27 or higher is available from # ftp://space.mit.edu/pub/davis # It provides color support for Lynx. # !!!!!!!!!!!!! NCURSES Support (For color version of Lynx). !!!!!!!!!!!!!! # If you need ncurses, the latest version can always be found # in ftp://invisible-island.net/ncurses/ # or ftp://ftp.gnu.org/pub/gnu/ # Also be sure to check out the compilation symbols in userdefs.h # before building Lynx! # If you apply patches which require linking to site-specific libraries, set # SITE_LIBS to those libraries. SITE_LIBS= # Your libraries here # Set SITE_LYDEFS to one or more of the defines for the WWW Library: SITE_LYDEFS = # Your defines here # Set SITE_DEFS to one or more of the defines for lynx below: SITE_DEFS = # Your defines here # defines for which there are no configure options: # -DHP_TERMINAL For DIM workaround to REVERSE problems on HP terminals. # -DIGNORE_CTRL_C Define if Control-C shouldn't exit lynx. # -DNO_CPU_LIMIT Disables Max CPU timeout (includes CLOCKS_PER_SECOND) # -DNO_RULES Disables CERN-style access rules (see lynx.cfg). # -DSHORTENED_RBIND For a SOCKSified lynx with the short version of Rbind. # -DSLANG_MBCS_HACK prevent cutoff lines when using UTF8 console (slang only) # -DUSE_SCROLLBAR supports scrollbar when built with ncurses # # if you are linking to freeWAIS-0.202 or older, you should define this # in SITE_DEFS # # -DDECLARE_WAIS_LOGFILES # # if you have the reverse clear screen problem of some SUN4 systems you # should define this in SITE_DEFS # # -DREVERSE_CLEAR_SCREEN_PROBLEM # # if you have an SVR4 system with the "type any key" problem, try defining # this in LYFLAGS (SITE_LYDEFS) and SITE_DEFS # # -DSVR4_BSDSELECT # # Old Data General systems may need this in their SITE_LYDEFS # for their inet_addr(host) calls. # # -DDGUX_OLD # defines which have configure options (see INSTALLATION, Section II-1c.): # -DARCHIVE_ONLY # -DDIRED_SUPPORT # -DDISP_PARTIAL # -DDONT_TRACK_INTERNAL_LINKS # -DEXEC_LINKS # -DEXEC_SCRIPTS # -DEXP_CHARTRANS_AUTOSWITCH # -DEXP_PERSISTENT_COOKIES # -DLONG_LIST # -DLYNXCGI_LINKS # -DLY_FIND_LEAKS # -DNCURSES # -DNO_CHANGE_EXECUTE_PERMS # -DNO_EXTENDED_HTMLDTD # -DNO_PARENT_DIR_REFERENCE # -DNSL_FORK # -DOK_GZIP # -DOK_OVERRIDE # -DOK_PERMIT # -DOK_TAR # -DOK_UUDECODE # -DOK_ZIP # -DOPTIONS_FORMS # -DOPTIONS_MENU # -DSOCKS # -DSYSLOG_REQUESTED_URLS # -DUNDERLINE_LINKS # -DUSE_COLOR_STYLE # -DUSE_DEFAULT_COLORS # -DUSE_EXTERNALS # -DUSE_SLANG # -DUSE_SOCKS5 # -DUSE_ZLIB # # for installation of local execution links, please see the file userdefs.h # TESTED: Linux FreeBSD SunOS Solaris IRIX CLIX HP-UX AIX SCO all lynx$x: cfg_defs.h LYHelp.h @MSG_DIR_MAKE@ $(SHELL) $(srcdir)/fixtext.sh $(srcdir)/LYMessages_en.h >LYMessages.c @INTLDIR_MAKE@ cd intl && $(MAKE) CC="$(CC)" @MSG_DIR_MAKE@ cd po && $(MAKE) CC="$(CC)" cd $(WWWINC) && $(MAKE) CC="$(CC)" \ LY_CFLAGS="$(CFLAGS)" \ CPPFLAGS="$(CPPFLAGS)" \ LYFLAGS="$(SITE_LYDEFS)" cd src && $(MAKE) all CC="$(CC)" \ CFLAGS="$(CFLAGS)" \ CPPFLAGS="$(CPPFLAGS)" \ LIBS="$(LIBS) $(RESOLVLIB) $(WAISLIB) $(SITE_LIBS)" \ SITE_DEFS="$(SITE_DEFS)" \ WWWINC=$(WWWINC) \ WWWLIB="../$(WWWINC)/libwww.a" lint: cd $(WWWINC) && $(MAKE) LINT="$(LINT)" CC="$(CC)" \ LY_CFLAGS="$(CFLAGS)" \ CPPFLAGS="$(CPPFLAGS)" \ LYFLAGS="$(SITE_LYDEFS)" lint cd src && $(MAKE) all LINT="$(LINT)" CC="$(CC)" \ CFLAGS="$(CFLAGS)" \ CPPFLAGS="$(CPPFLAGS)" \ LIBS="$(LIBS) $(RESOLVLIB) $(WAISLIB) $(SITE_LIBS)" \ SITE_DEFS="$(SITE_DEFS)" \ WWWINC=$(WWWINC) \ WWWLIB="../$(WWWINC)/libwww.a" lint help: @echo @echo "Please run make with one of the following arguments" @echo "all -- to make the executable, put it in this directory" @echo "clean -- removes all '.o' and 'core' files" @echo "depend -- use makedepend to generate header-dependencies" @echo "tar -- runs clean, removes executable, and tars the whole directory" @echo "compress -- runs tar, then compresses the result" @echo "zip -- runs clean, removes executable, and zips the whole directory" @echo ##Miscellaneous actions clean: rm -f WWW/Library/*/*.[aoib] rm -f WWW/Library/*/.created cd src && $(MAKE) clean @MSG_DIR_MAKE@ rm -f LYMessages.c @INTLDIR_MAKE@ cd intl && $(MAKE) $@ @MSG_DIR_MAKE@ cd po && $(MAKE) $@ rm -f *.b src/lynx$x *.leaks cfg_defs.h LYHelp.h lint.* @LYNXCFG_MAKE@ -rm -f alphatoc.html body.html cattoc.html tmp007 rm -f help_files.sed rm -f core *.core depend: cfg_defs.h LYHelp.h cd $(WWWINC) && $(MAKE) $@ cd src && $(MAKE) $@ distclean: clean -rm -f WWW/Library/*/*~ -rm -f WWW/Library/*/*.bak -rm -rf src/obsolete -cd src && $(MAKE) $@ -cd src/chrtrans && $(MAKE) $@ @INTLDIR_MAKE@ cd intl && $(MAKE) $@ -rm -f intl/libintl.h @MSG_DIR_MAKE@ -rmdir intl @MSG_DIR_MAKE@ cd po && $(MAKE) $@ @MSG_DIR_MAKE@ -rmdir po -rm -f *~ *.bak *.sav tags TAGS -rm -f $(WWWINC)/makefile src/makefile src/chrtrans/makefile @SRCDIR_CLEAN@ -rmdir $(WWWINC) && rmdir WWW/Library && rmdir WWW @SRCDIR_CLEAN@ -rmdir src/chrtrans && rmdir src -rm -f makefile lynx_cfg.h config.status config.log config.cache -rm -f lynx$x install-* maintainer-clean: distclean -find . -type f -name '*.rej' -exec rm -f {} \; -find . -type f -name '*.orig' -exec rm -f {} \; -rm -rf WWW/Library/*/obsolete -rm -f Lynx.prj .*_aux tar: clean rm -f lynx$x $(MAKE) save turnover: clean $(MAKE) save zipcompress: compress zip echo "done!" zip: clean rm -f src/lynx$x rm -f lynx$x rm -f src/a.out rm -f ../$(lynxname).zip cd ..; rm -f $(lynxname).zip; zip -r $(lynxname).zip $(lynxdir) save: cd ..; rm -f $(lynxname).tar; tar -cf - $(lynxdir) > $(lynxname).tar compress: tar cd ..; rm -f $(lynxname).tar.Z; compress -f -v $(lynxname).tar # Directory containing reference source for patch generation, # either absolute or relative to $(top_srcdir)/.. REFDIR=orig/$(lynxdir) lynx.patch: $(top_srcdir) $(top_srcdir)/CHANGES - cd $(top_srcdir)/.. && cd $(REFDIR) && { rm -f \ config.log \ config.status \ lynx_cfg.h \ ; \ for I in . src $(WWWINC); do ( set +e; \ ( set -x; cd $$I && rm -f *.orig *.rej makefile ); : ); \ done; } ( cd $(top_srcdir)/..; echo "%%% Created `date` by target $@. %%%"; \ if diff -bru /dev/null /dev/null; \ then diff -bru $(REFDIR) $(lynxdir); \ else diff -brc $(REFDIR) $(lynxdir); fi ) \ | grep -v '^Common' \ | grep -v '^Binary files ' \ | grep -v '^Only ' | tee $@ | egrep '^\-\-\- .*$(lynxdir)' install: install-bin install-man install-cfg @INSTALL_LSS@ @echo @echo "Use $(MAKE) install-help to install the help-files" @echo "Use $(MAKE) install-doc to install extra documentation files" @echo install-full: install install-help install-doc @echo Full installation complete. install-bin: $(BINDIR) lynx$x @MSG_DIR_MAKE@ cd po && $(MAKE) CC="$(CC)" install -mv -f $(BINDIR)/lynx$x $(BINDIR)/lynx.old $(INSTALL_PROGRAM) lynx$x $(BINDIR)/lynx$x install-man : $(MANDIR) $(INSTALL_DATA) $(srcdir)/lynx.man $(MANDIR)/lynx.1 install-doc : $(DOCDIR) $(HELPDIR) @echo Copying sample files (cd $(srcdir) && tar cf - C[HO]* PROBLEMS README samples test ) | \ ( cd $(DOCDIR) && chmod -R u+w . && tar xf - ) $(SHELL) -c 'for name in COPYING COPYHEADER; do \ cd $(HELPDIR) && rm -f $$name ;\ cd $(HELPDIR) && ( $(LN_S) $(DOCDIR)/$$name . || cp $(DOCDIR)/$$name . );\ done' # HPUX 'sed' does not seem to like '=' as pattern delimiter. # We cannot use '%' because it may appear in a URL. # Andrew filesystem uses '@'. # So we limit sed delimiters to '!' and '%', depending on the expected text. FIX_SED = tr '=' '"' help_files.sed : makefile $(srcdir)/lynx_help/help_files.txt @echo Constructing sed-script $@ @-rm -f $@ help_files.tmp @cat $(srcdir)/lynx_help/help_files.txt > help_files.tmp @LYNXCFG_MAKE@ @echo 's!http://www.hippo.ru/%7Ehvv/lynxcfg_toc.html#alphatoc!alphatoc.html!g' >> help_files.tmp @LYNXCFG_MAKE@ @echo 's!http://www.hippo.ru/%7Ehvv/lynxcfg_toc.html!cattoc.html!g' >> help_files.tmp @LYNXCFG_MAKE@ @echo 's!alphatoc\.html!alphatoc.html$(COMPRESS_EXT)!g' >> help_files.tmp @LYNXCFG_MAKE@ @echo 's!cattoc\.html!cattoc.html$(COMPRESS_EXT)!g' >> help_files.tmp @LYNXCFG_MAKE@ @echo 's!body\.html!body.html$(COMPRESS_EXT)!g' >> help_files.tmp @ECHO_CC@sed -e '/^#/d' -e '/^$$/d' \ -e 's%\(.*\)=\(.*\@.*\)$$%s=@\1@=\2=g%' \ -e 's%\(.*\)=\(http:.*\)$$%s=@\1@=\2=g%' \ -e 's%\(.*\)=\(ftp:.*\)$$%s=@\1@=\2=g%' \ -e 's%\(.*\)=\(.*\.html\)$$%s=@\1@=\2$(COMPRESS_EXT)=g%' \ help_files.tmp | $(FIX_SED) > $@ @echo Appending interim-fix for existing html files to $@ @ECHO_CC@sed -e '/^#/d' -e '/[:@]/d' -e '/^$$/d' \ -e 's%\(.*\)=\(.*\.html\)$$%s=\2=\2$(COMPRESS_EXT)=g%' \ -e 's%\.html=%\\.html=%' \ help_files.tmp | $(FIX_SED) >> $@ @ECHO_CC@if test -n "$(COMPRESS_EXT)"; then echo 's%\$(COMPRESS_EXT)\$(COMPRESS_EXT)%$(COMPRESS_EXT)%g' >> $@; fi @-rm -f help_files.tmp install-help : help_files.sed $(HELPDIR) (cd $(HELPDIR) && WD=`pwd` && HEAD=`echo $$WD|sed -e 's!/lynx_help$$!!'` && test $$WD != $$HEAD && rm -rf *) @LYNXCFG_MAKE@ @echo 'Making htmlized lynx.cfg' @LYNXCFG_MAKE@ cd src && make LYReadCFG.i @LYNXCFG_MAKE@ @-rm -f alphatoc.html body.html cattoc.html @LYNXCFG_MAKE@ sed -n -e '/Config_Type *Config_Table/,/{0, *0, *0}/ p' src/LYReadCFG.i | \ @LYNXCFG_MAKE@ sed -e 's/ *{ *"\([^"]*\)".*/\1/' | \ @LYNXCFG_MAKE@ perl $(srcdir)/scripts/cfg2html.pl -ms $(srcdir)/lynx.cfg @echo Translating/copying html files @cat help_files.sed > $(HELPDIR)/help_files.sed @LYNXCFG_MAKE@ @$(SHELL) -c 'for f in alphatoc.html body.html cattoc.html ; do \ @LYNXCFG_MAKE@ sed -f $(HELPDIR)/help_files.sed $$f > $(HELPDIR)/$$f ; \ @LYNXCFG_MAKE@ done' @LYNXCFG_MAKE@ -rm -f src/LYReadCFG.i @ECHO_CC@$(SHELL) -c 'cd $(srcdir)/lynx_help && ( \ dirs=keystrokes; \ (cd $(HELPDIR) && mkdir $$dirs 2>/dev/null ) ; \ files="*.html */*.html" ; \ for f in $$files ; do \ sed -f $(HELPDIR)/help_files.sed $$f > $(HELPDIR)/$$f ; \ done ; \ if test "$(COMPRESS_PROG)" != "" ; then \ (cd $(HELPDIR) && $(COMPRESS_PROG) $$files ) \ fi ; \ )' @-rm -f $(HELPDIR)/help_files.sed @echo Updating $(libdir)/lynx.cfg $(SHELL) -c 'if test -f $(LIBDIR)/lynx.cfg ; then \ mv $(LIBDIR)/lynx.cfg $(LIBDIR)/lynx.tmp ; \ else \ cp $(srcdir)/lynx.cfg $(LIBDIR)/lynx.tmp ; \ fi' @echo Updating $(libdir)/lynx.cfg to point to installed help-files @ECHO_CC@sed -e '/^HELPFILE:http/s!^!#!' \ -e '/^#HELPFILE:file/s!#!!' \ -e '/^HELPFILE:file/s!/PATH_TO/lynx_help!$(helpdir)!' \ -e '/^[A-Z_]*:/s!/PATH_TO/lynx_doc!$(docdir)!' \ -e '/^HELPFILE:file/s!$$!$(COMPRESS_EXT)!' \ -e '/^HELPFILE:file/s!$(COMPRESS_EXT)$(COMPRESS_EXT)$$!$(COMPRESS_EXT)!' \ $(LIBDIR)/lynx.tmp >$(LIBDIR)/lynx.cfg chmod 644 $(LIBDIR)/lynx.cfg -rm -f $(LIBDIR)/lynx.tmp LYHelp.h : help_files.sed LYHelp.hin @echo Creating $@ @sed -f help_files.sed $(srcdir)/LYHelp.hin > $@ @echo '**********************************************' @echo @$(SHELL) -c 'if test "$(COMPRESS_PROG)" = "" ; then \ echo " Help files will NOT be gzipped."; \ else \ echo " Help links point to compressed files"; \ echo " To access them properly you have to type"; \ echo " make install-help"; \ fi' @echo @echo '**********************************************' cfg_defs.h : $(srcdir)/cfg_defs.sh $(srcdir)/cfg_edit.sh config.cache lynx_cfg.h @rm -f $@ $(SHELL) -c '$(srcdir)/cfg_defs.sh $(srcdir)' install-cfg : $(LIBDIR) -mv -f $(LIBDIR)/lynx.cfg $(LIBDIR)/lynx.oldcfg $(INSTALL_DATA) $(srcdir)/lynx.cfg $(LIBDIR)/lynx.cfg install-lss : $(LIBDIR) -mv -f $(LIBDIR)/lynx.lss $(LIBDIR)/lynx.oldlss $(INSTALL_DATA) $(srcdir)/samples/lynx.lss $(LIBDIR)/lynx.lss uninstall :: @MSG_DIR_MAKE@ cd po && $(MAKE) CC="$(CC)" uninstall -rm -f $(BINDIR)/lynx$x -rm -f $(MANDIR)/lynx.1 -rm -f $(LIBDIR)/lynx.cfg -rm -f $(LIBDIR)/lynx.lss uninstall \ uninstall-help :: -test -d $(HELPDIR) && WD=`cd $(HELPDIR) && pwd` && HEAD=`echo $$WD|sed -e 's!/lynx_help$$!!'` && test $$WD != $$HEAD && rm -rf $(HELPDIR) uninstall \ uninstall-doc :: -test -d $(DOCDIR) && WD=`cd $(DOCDIR) && pwd` && HEAD=`echo $$WD|sed -e 's!/lynx_doc$$!!'` && test $$WD != $$HEAD && rm -rf $(DOCDIR) -test -d $(HELPDIR) && WD=`cd $(HELPDIR) && pwd` && HEAD=`echo $$WD|sed -e 's!/lynx_help$$!!'` && test $$WD != $$HEAD && cd $(HELPDIR) && rm -f COPYING COPYHEADER $(BINDIR) $(MANDIR) $(LIBDIR) $(HELPDIR) $(DOCDIR) : $(srcdir)/mkdirs.sh $@ etags: etags -r "/\(PRIVATE\|PUBLIC\)[ \t]+\([a-zA-Z_][a-zA-Z_0-1]*[ \t*]+\)*\([a-zA-Z_][a-zA-Z_0-1]*\)[ \t]+\(ARGS[0-9]\|NOARGS\)/\3/" *.[ch] */*.[ch] */*/*.[ch] */*/*/*.[ch]