[http, https | telnet, tn3270, rlogin | gopher | file | ftp | wais | news, nntp, snews | newspost, newsreply, snewspost, snewsreply | mailto | finger | cso | lynxexec, lynxprog | lynxcgi| internal]
Lynx resolves partial or relative URLs in documents with respect to the BASE if one was specified, otherwise with respect to the document's absolute URL, using the rules described in RFC1808:
and in subsequent drafts of the IETF:When entering a URL on the command line to be used as the startfile, or at the prompt for a 'g'oto entry, a partial host field can be used and the scheme field can be omitted if the scheme and fully qualified domain name can be constructed internally by using the URL_DOMAIN_PREFIXES and URL_DOMAIN_SUFFIXES definitions in the Lynx configuration file. See the explanation of those definitions and their use in your lynx.cfg. For example, wfbr will be treated as http://www.wfbr.edu/, and wfbr/dir/lynx will be treated as http://www.wfbr.edu/dir/lynx, but gopher.wfbr.edu/11/_fileserv/_lynx will be treated as gopher://gopher.wfbr.edu/11/_fileserv/_lynx. For files or directories on the local host, a tilde (~) is expanded to the path of the account's login directory, e.g., ~/foo will be expanded to file://localhost/your/login/directory/foo. The tilde expansion is done homologously on Unix and VMS. On VMS, Lynx also will expand any file or directory spec recognizable to DCL into a valid URL, e.g., [] will be expanded to file://localhost/current/default/directory. These expansions are SOLELY for startfile or 'g'oto entries! Any partial or relative URLs within HTML documents are resolved according to the rules specified in RFC1808 and subsequent IETF drafts.
The https URL has the same format, but the default port is :443. Patches for support of https URLs and the CONNECT procedure are available for qualified recipients via Lynx links. US Export laws and associated red tape pose severe impediments to inclusion of this support in the general distributions of freeware WWW clients such as Lynx. Sorry.
The user and/or :password fields may be omitted, and the @ should be omitted if neither is present. The port defaults to :23 when omitted in the URL.
A tn3270 or rlogin URL is specified equivalently, and similarly spawns a tn3270 or rlogin session. The actual behavior is dependent on the TCP-IP software installed on the local and target hosts.
It is unwise to include the :password field except for URLs which point to anonymous or other public access accounts, and for most TCP-IP software you will be prompted for a password whether or not one was included in the URL.
Lynx does not overtly support the gopher+ protocol, and does not
represent itself as gopher+ capable when communicating with gopher
servers. Lynx might transmit any (hex-escaped-tab-separated) extended
gopher+ fields in a URL if an author included them in a document, but is
likely to mishandle what the gopher server returns in such cases, and would
not generate and transmit them itself. For pre-formed URLs to submit gopher
searches, it may be better to use a ? rather than hex-escaped tab
(%09) as the separator for the searchpart in the
selector, e.g.:
gopher://gopher.wfbr.edu/77/_shell/search.shell%20/_shell/walker?lynx*
Lynx will handle the %09 if you use that instead of ?,
but other WWW clients may mishandle it.
For the gophertype which signifies HTML (h), if the
selector begins with GET%20/ Lynx will convert the gopher
URL to an http URL, e.g.: The /path is treated as originating at the root, unless
you include a tilde (~), e.g.: On VMS, the first element of the path, if not a tilde, is assumed to
be a device, e.g.: The default port is :21 and the default username
is anonymous. If username is included but not
:password, Lynx will prompt you for the password. This is
recommended, as otherwise the URL will have it completely unencrypted.
Do not include the @ if neither username nor
:password is included. For anonymous ftp, Lynx uses your
personal_mail_address (user@host) as the :password
if it has been defined via the 'o'ptions menu. Otherwise,
Lynx uses the dummy password WWWUser.
The ;type= parameter can be used with value D,
I, or A to force handling of the URL as, respectively,
a directory listing, binary file, or ASCII file. The Lynx ftp gateway
normally determines this itself, but the parameter can be used if the
internal procedure draws an incorrect inference about the nature of
the ftp URL.
The /path is treated according to RFC1738 for VMS
and VM/CMS ftp servers. The lead slash (/) is treated purely
as a separator, not as a designator for the root, and the path
string if present is treated as in or under the login directory. For
VMS ftp servers, if you wish to have the first element treated as a
device rather than file or subdirectory name, begin it with a hex-escaped
slash (%2f), e.g.: For Unix and Unix-emulation ftp servers, RFC1738 is not respected
and the lead slash is treated as the root, i.e., the /path is
handled equivalently to that in file URLs. The distinction is
irrelevant for anonymous ftp, but matters when using ftp for
non-anonymous accounts. If you are using ftp with a Unix server and
do wish to get a listing of the login directory or have the path
string treated as a file or path under the login directory, include a
tilde (~) as for file URLs, e.g.: Direct wais support is built into Lynx for VMS, and can be compiled
into Lynx on Unix.
If only a database is indicated in the URL, Lynx returns
an ISINDEX cover page for searching that database, and will
submit your search with the wais_query appended. Lynx will
convert the server's reply into a hit list with URLs that include the
wais_type and wais_path for retrieving items from
the hit list.
The formats are: The messageID is the message's unique identifier, consisting
of an identification string and the host of origin for the message
(ident_string@origin_host).
Lynx also supports wildcarding via an asterisk for listings of news
hierarchies or sub-hierarchies, e.g.: Lynx allows you both to reply to the author of a news message
via email, and, if news posting has been enabled, to send a followup
message to the newsgroup (see newspost, newsreply,
snewspost, snewsreply).
Lynx converts any strings in news messages which appear to be a URL
with a supported scheme into a link for accessing that URL.
Lynx also supports the newsgroup and message number URL scheme: The formats are: If the host field is omitted, it defaults to that pointed to by the
NNTPSERVER configuration or environmental variable. Inclusion of at
least one newsgroup in the URL is required, and additional groups can
be specified as a comma-separated list. Wildcarding of newgroup names
is not supported for these URLs. For newsreply and snewsreply URLs, if
an external editor has been defined via the Options Menu, the
user is offered an option to include the currently displayed document,
which presumeably is a news article with a followup link that
was activated, and if confirmed, each line of that document is prefixed
with a right-angle-bracket. The user is expected to edit such an inclusion
so that only the passages relevant to the followup message are retained.
These URLs can be used as command line startfiles (in which case, Lynx
will exit after posting the message, and the newreply or snewsreply URLs
degrade to newspost or snewpost URLs, respectively). They also can be used
as HREF attribute values in any HTML document homologously to mailto URLs, with the qualification that they presently
are supported only by Lynx.
The description of the mailto URL in RFC1738 has been interpreted by
some as allowing only a single recipient, but Lynx invented the mailto URL,
has always supported a series of user@host addresses as a comma-separated
list, and still does. For compatibility with Explorer, Lynx also accepts
a semi-colon-separated list.
For compatibility with Netscape, Lynx parses any
?subject=The%20Subject appended to the URL, trims the URL
at the ?, and uses the value as the default Subject: for
the message or FORM content mailing. This is not recommended practice.
The preferred way to indicate the default Subject: for a LINK or Anchor
with a mailto HREF, or a FORM with a mailto ACTION, is via a TITLE
attribute with the subject string as its value, e.g.: Note that a TITLE attribute for FORM is now included in the HTML
specifications. Some clients use a SUBJECT attribute for this purpose
in FORM tags, and Lynx recognizes that as a synonym for TITLE.
Lynx also will process any to=address(es),
cc=address(es), keywords=word_list and/or
body=message fields in ?searchpart tack-ons to mailto
URLs. The to and/or cc values can be single addresses,
or comma- or semi-colon-separated lists of addresses. All addresses,
and any body values, will be offered for approval by the user
before proceeding with a mailing. Any other name=value pairs in the
?searchpart will be ignored. Also, if the mailto URL is the
ACTION for a FORM, any body in a ?searchpart tack-on
will be ignored, because the body of the mailing must be constructed
solely from the the FORM's content. Lynx expects multiple name=value
pairs in a ?searchpart tack-on to be separated by ampersands,
as in the original Netscape implementation, and in an equally ill-advised
IETF draft of that implementation (draft-hoffman-mailto-url-03.txt). These should be represented as
entities (&) in the HTML markup. This functionality
is generally desired, but the IETF backward compatibility principal
normally would lead to a new scheme being used (e.g., mail:, or
smtp:), rather than breaking mailto: implementations.
If ENCTYPE="text/plain" is specified for a FORM with a mailto
ACTION, Lynx will not hex escape the name=value pairs of the FORM's content,
and will use physical newlines instead of '&' or ';'
to separate the pairs, so that the content will be readable directly.
Otherwise, Lynx will mail the content with the default: Note that when mailing FORM content Lynx wraps any lines longer than 78
characters, to avoid buffer overflows in mail software and to ensure reliable
transmission across gateways. If the ENCTYPE was not text/plain,
any script which decodes the mailed content should ignore the physical
newlines and recognize only hex escaped newline characters as intended
to be present in the decoded content.
If the mailto URL is not the ACTION for a FORM, and if an external
editor has been defined via the Options Menu, the user is offered
an option to include the currently displayed document. If this option is
accepted, each line of that document is prefixed with a right-angle-bracket,
and the prefixed inclusion should be trimmed by the user to just those
passages relevant to the message which will be sent.
Activating a finger URL will send a request to the finger server via
port 79 on the host specified. You can include :79 in the URL,
but no other value is allowed. The /w or /%2fw is used
to request a full report for finger servers which support it, and is not
case sensitive (i.e., can be /W or /%2fW). Any strings
in the report which appear to be a URL with a supported scheme will be
converted into a link for accessing that URL.
An alternative way to access finger servers is via gopher URLs with
port 79 and the plain text (0) gophertype specified: You also can use a gopher URL format with port 105 and the CSO
(2) gophertype specified: Lynx will parse the stream returned by the server for the above
URLs and create a FORM for submitting additional requests (searches)
to the server. Any strings in the reports returned for these requests
(searches) which appear to be a URL with a supported scheme will be
converted into a link for accessing that URL.
You optionally can include //localhost/ in the URL, between the
scheme field and the command, but that is always implied. The lynxexec
and lynxprog URLs differ only in that with lynxexec you are prompted to
enter RETURN before Lynx clears the screen and restores the
previously displayed document, so that you can read any screen output
generated by the spawned command, whereas no such pause is imposed upon exit
from the utility invoked via lynxprog.
These are Lynxisms and should be used only in local documents intended
solely for Lynx.
This is a Lynxism and should be used only in local documents intended
solely for Lynx, or for limited local testing of CGI scripts without an
http server.
On VMS, you are advised to use the threaded OSU http server, available
from ftp://osu.edu as freeware, if your site does not already have an http
server. It can be installed as a purely local script server, and is far
more efficient and comprehensive than any code which might be incorporated
within Lynx.
For example, tempting though it might be, do not use these: If you must try one, the second is OK from the command line:
will become:
The port field will be retained if it is not :80, and will default
to :70 if it was defaulted originally. These conventions were
adopted during development of the University of Minnesota gopher software
to facilitate the offering of links to MIME-capable http servers in the
listings returned by gopher servers, but should be considered Lynxisms
and UMN Gopherisms.
The file URL:
The file URL is used to retrieve files or generate a directory listing
on the local host. The host field can be localhost or a domain
name for the local host:
If you do not use localhost or a domain name for the local host,
Lynx will substitute ftp:// for file:// and treat it
as an ftp URL.
The latter feature is a Lynxism, is done homologously on Unix and VMS,
and should be used ONLY in local documents intended for Lynx.
should be used for: www_root:[directory]filename.suffix
If you are unsure how to specify a file URL in local documents on
VMS, invoke Lynx with the desired file or directory as the
startfile using any spec acceptable to DCL, and then
use the showinfo command (=) to see the file
URL which Lynx created for it.
The ftp URL:
The ftp URL has the general format:
can be used for a listing of sys$common:[syshlp]
Also, on VM/CMS ftp servers, if the path string begins
with vmsysu%3a it receives special handling as an SFS
path, e.g.:
The wais URL:
The wais URL is used to retrieve resources using the Wide Area Information
System protocol. The format is:
where :port defaults to :210
The news, nntp, and snews URLs:
The news and nntp URLs are handled by Lynx as specified in RFC1738, but
for compatibility with other clients, Lynx allows inclusion of host and
port fields in news URLs, which properly should be used only in
nntp and snews URLs. If not included in news URLs, Lynx will use the nntp
server pointed to by the NNTPSERVER environment variable or configuration
symbol (see lynx.cfg), with default port :119. A host field must
be included in nntp URLs, and the port field is optional with the same
default. Patches for support of snews URLs are available to qualified
recipients via Lynx links
but cannot be included in the general distribution (sorry, see http and https).
(snews same as nntp, but the default port is :563)
(snews same as nntp, but the default port is :563)
This is not in RFC1738 and may not be supported by all other clients.
(snews same as nntp, but the default port is :563)
Use of this scheme is not recommended, because the message numbers
are specific to each nntp server, unlike the unique identifiers for
news messages.
The newspost, newsreply, snewspost, and
snewsreply URLs:
When Lynx receives group listings or articles via news,
nntp or snews URLs, it also checks whether the
nntp server supports posting from the Lynx user's site, and if so,
includes links for posting new messages to that server, or for posting
followups (replies) to previously posted messages. RFC1738, and IETF
URL drafts through this release of Lynx, do not include any schemes
for posting to news groups. Lynx has long supported newspost and
newreply URL schemes for posting new messages or sending followups,
respectively, to standard nntp servers, with default port :119.
Lynx now also supports homologous snewspost and snewsreply URLs for use
with SSL capable nntp servers, but the latter requires patches for built
in SSL support, or use of a daemon which handles the secure communications
on behalf of Lynx.
(snewspost and snewsreply have the same formats, but the default port is
:563)
The mailto URL:
The mailto URL is used to provide links that when activated can be
used to send a comment or the content of a FORM to an Internet email
address (user@host). The format is:
or:
if the latter was indicated.
The finger URL:
Lynx has full support for the finger protocol, but a format for finger
URLs has not yet been adopted by the IETF. The formats supported by Lynx
therefore include every possibility not inconsistent with RFC1738,
including:
finger://host finger://@host
finger://host/ finger://@host/
finger://host/%2fw finger://@host/w
finger://host/w finger://host/w/
finger://host/username[@host] finger://username@host
finger://host/username[@host]/ finger://username@host/
finger://host/w/username[@host] finger://username@host/w
finger://host/%2fw%20username[@host] finger://host/username[@host]/w
finger://host/w/username
gopher://host:79/0
Lynx will handle such URLs equivalently to overt finger URLs, including
creation of links for any strings which appear to be supported URLs.
The cso URL:
The cso URL is intended to provide a gateway to CSO/PH (QI) servers.
The requests are made on port 105 by default (:105), with the
following overt cso URL format:
The lynxexec and lynxprog URLs:
If execution of spawned commands has been enabled in your Lynx image, the
lynxexec and lynxprog URLs can be used to execute arbitrary system commands
or invoke system utilities. Any system command and associated switches
or qualifiers can be used, with the syntax appropriate for a shell running
Lynx on Unix, or for DCL on VMS, e.g.:
(Note, however, that restrictions on acceptable commands or utilities
may be imposed by the system administrator.)
The lynxcgi URL:
The lynxcgi URL is implemented only on Unix, can be used as the
ACTION for a FORM, and if enabled in your Lynx image has the format:
The LYNXfoo internal URLs:
Lynx uses a variety of internal URL schemes as structured stream
objects for communication among its display modules. If you discover
what they are, and are tempted to use them externally in documents,
find the self-restraint to resist that temptation!!!
(Yes, they'll work. No, they won't do any harm. But...)
But within Lynx, use the 'K' keystroke command.