1 LYNX 2 Name lynx - a general purpose distributed information browser for the World Wide Web 2 Synopsis lynx [options] [optional paths or URLs] lynx [options] [path or URL] -get_data data -- lynx [options] [path or URL] -post_data data -- Use "lynx -help" to display a complete list of current options. 2 Description Lynx is a fully-featured World Wide Web (WWW) client for users running cursor-addressable, character-cell display devices (e.g., vt100 terminals, vt100 emulators running on Windows 95/NT/XP/7/8 or any POSIX platform, or any other "curses-oriented" display). It will display hypertext markup language (HTML) documents containing links to files residing on the local system, as well as files residing on remote systems running Gopher, HTTP, FTP, WAIS, and NNTP servers. Current versions of Lynx run on Unix, VMS, Windows 95/NT/XP/7/8, DOS DJGPP and OS/2. Lynx can be used to access information on the World Wide Web, or to build information systems intended primarily for local access. For example, Lynx has been used to build several Campus Wide Information Systems (CWIS). In addition, Lynx can be used to build systems isolated within a single LAN. 2 Options At start up, Lynx will load any local file or remote URL specified at the command line. For help with URLs, press "?" or "H" while running Lynx. Then follow the link titled, "Help on URLs." If more than one local file or remote URL is listed on the command line, Lynx will open only the last interactively. All of the names (local files and remote URLs) are added to the G)oto history. Lynx uses only long option names. Option names can begin with double dash "--" as well, underscores and dashes can be intermixed in option names (in the reference below, options are shown with one dash "-" before them, and with underscores "_"). Lynx provides many command-line options. Some options require a value (string, number or keyword). These are noted in the reference below. The other options set boolean values in the program. There are three types of boolean options: set, unset and toggle. If no option value is given, these have the obvious meaning: set (to true), unset (to false), or toggle (between true/false). For any of these, an explicit value can be given in different forms to allow for operating system constraints, e.g., -center:off -center=off -center- Lynx recognizes "1", "+", "on" and "true" for true values, and "0", "-", "off" and "false" for false values. Other option-values are ignored. The default boolean, number and string option values that are compiled into Lynx are displayed in the help-message provided by lynx -help. Some of those may differ according to how Lynx was built; see the help message itself for these values. The -help option is processed in the third pass of options-processing, so any option which sets a value, as well as runtime configuration values are reflected in the help-message. - If the argument is only "-", then Lynx expects to receive the arguments from the standard input. This is to allow for the potentially very long command line that can be associated with the -get_data or -post_data arguments (see below). It can also be used to avoid having sensitive information in the invoking command line (which would be visible to other processes on most systems), especially when the -auth or -pauth options are used. -accept_all_cookies accept all cookies. -anonymous apply restrictions for anonymous account, see also -restrictions. -assume_charset=MIMEname charset for documents that do not specify it. -assume_local_charset=MIMEname charset assumed for local files, i.e., files which Lynx creates such as internal pages for the options menu. -assume_unrec_charset=MIMEname use this instead of unrecognized charsets. -auth=ID:PASSWD set authorization ID and password for protected documents at startup. Be sure to protect any script files which use this switch. -base prepend a request URL comment and BASE tag to text/html outputs for -source dumps. -bibhost=URL specify a local bibp server (default http://bibhost/). -blink forces high intensity background colors for color mode, if available and supported by the terminal. This applies to the slang library (for a few terminal emulators), or to OS/2 EMX with ncurses. -book use the bookmark page as the startfile. The default or command line startfile is still set for the Main screen command, and will be used if the bookmark page is unavailable or blank. -buried_news toggles scanning of news articles for buried references, and converts them to news links. Not recommended because email addresses enclosed in angle brackets will be converted to false news links, and uuencoded messages can be trashed. -cache=NUMBER set the NUMBER of documents cached in memory. The default is 10. -case enable case-sensitive string searching. -center toggles center alignment in HTML TABLE. Normally table cells are centered on the table grid. Set this option "on" to disable centering. The default is "off". -cfg=FILENAME specifies a Lynx configuration file other than the default lynx.cfg. -child exit on left-arrow in startfile, and disable save to disk and associated print/mail options. -child_relaxed exit on left-arrow in startfile, but allow save to disk and associated print/mail options. -cmd_log=FILENAME write keystroke commands and related information to the specified file. -cmd_script=FILENAME read keystroke commands from the specified file. You can use the data written using the -cmd_log option. Lynx will ignore other information which the command-logging may have written to the logfile. Each line of the command script contains either a comment beginning with "#", or a keyword: exit causes the script to stop, and forces Lynx to exit immediately. key the character value, in printable form. Cursor and other special keys are given as names, e.g., "Down Arrow". Printable 7-bit ASCII codes are given as-is, and hexadecimal values represent other 8-bit codes. set followed by a "name=value" allows one to override values set in the lynx.cfg or .lynxrc files. Lynx tries the cfg-file setting first. -collapse_br_tags toggles collapsing of BR tags. -color forces color mode on, if available. Default color control sequences which work for many terminal types are assumed if the terminal capability description does not specify how to handle color. Lynx needs to be compiled with the slang library for this flag, it is equivalent to setting the COLORTERM environment variable. (If color support is instead provided by a color- capable curses library like ncurses, Lynx relies completely on the terminal description to determine whether color mode is possible, and this flag is not needed and thus unavailable.) A saved show_color=always setting found in a .lynxrc file at startup has the same effect. A saved show_color=never found in .lynxrc on startup is overridden by this flag. -connect_timeout=N Sets the connection timeout, where N is given in seconds. -cookie_file=FILENAME specifies a file to use to read cookies. If none is specified, the default value is ~/.lynx_cookies for most systems, but ~/cookies for MS-DOS. -cookie_save_file=FILENAME specifies a file to use to store cookies. If none is specified, the value given by -cookie_file is used. -cookies toggles handling of Set-Cookie headers. -core toggles forced core dumps on fatal errors. Turn this option off to ask Lynx to force a core dump if a fatal error occurs. -crawl with -traversal, output each page to a file. with -dump, format output as with -traversal, but to the standard output. -curses_pads toggles the use of curses "pad" feature which supports left/right scrolling of the display. The feature is normally available for curses configurations, but inactive. To activate it, use the "|" character or the LINEWRAP_TOGGLE command. Toggling this option makes the feature altogether unavailable. -debug_partial separate incremental display stages with MessageSecs delay -default_colors toggles the default-colors feature which is normally set in the lynx.cfg file. -delay add DebugSecs delay after each progress-message -display=DISPLAY set the display variable for X rexec-ed programs. -display_charset=MIMEname set the charset for the terminal output. -dont_wrap_pre inhibit wrapping of text when -dump'ing and -crawl'ing, mark wrapped lines of 
 in interactive session.

       -dump  dumps  the  formatted  output  of  the default document or those
              specified on  the  command  line  to  standard  output.   Unlike
              interactive mode, all documents are processed.  This can be used
              in the following way:

                  lynx -dump http://www.subir.com/lynx.html

              Files specified on the command line are  formatted  as  HTML  if
              their  names  end  with one of the standard web suffixes such as
              ".htm" or ".html".  Use the -force_html option to  format  files
              whose names do not follow this convention.

       -editor=EDITOR
              enable  external  editing, using the specified EDITOR.  (vi, ed,
              emacs, etc.)

       -emacskeys
              enable emacs-like key movement.

       -enable_scrollback
              toggles compatibility with  communication  programs'  scrollback
              keys (may be incompatible with some curses packages).

       -error_file=FILE
              define a file where Lynx will report HTTP access codes.

       -exec  enable local program execution (normally not configured).

       -fileversions
              include all versions of files in local VMS directory listings.

       -find_leaks
              toggle memory leak-checking.  Normally this is not compiled-into
              your executable, but when it  is,  it  can  be  disabled  for  a
              session.

       -force_empty_hrefless_a
              force  HREF-less "A" elements to be empty (close them as soon as
              they are seen).

       -force_html
              forces the first document to be interpreted as HTML.

              This is most useful  when  processing  files  specified  on  the
              command line which have an unrecognized suffix (or the suffix is
              associated with a non-HTML type, such as ".txt" for  plain  text
              files).

              Lynx recognizes these file suffixes as HTML:

                  ".ht3",
                  ".htm",
                  ".html3",
                  ".html",
                  ".htmlx",
                  ".php3",
                  ".php",
                  ".phtml",
                  ".sht", and
                  ".shtml".

       -force_secure
              toggles forcing of the secure flag for SSL cookies.

       -forms_options
              toggles whether the Options Menu is key-based or form-based.

       -from  toggles transmissions of From headers.

       -ftp   disable ftp access.

       -get_data
              properly  formatted  data  for  a  get form are read in from the
              standard input and passed to the form.  Input is terminated by a
              line that starts with "---".

              Lynx  issues  an  HTTP  GET, sending the form to the path or URL
              given on the command-line and prints the response of the server.
              If  no  path  or URL is given, Lynx sends the form to the start-
              page.

       -head  send a HEAD request for the mime headers.

       -help  print the Lynx command syntax usage message, and exit.

       -hiddenlinks=[option]
              control the display of hidden links.

              merge
                 hidden links show up as bracketed numbers  and  are  numbered
                 together with other links in the sequence of their occurrence
                 in the document.

              listonly
                 hidden links are shown only on  L)ist  screens  and  listings
                 generated  by  -dump  or  from  the  P)rint  menu, but appear
                 separately at the end of those lists.  This  is  the  default
                 behavior.

              ignore
                 hidden links do not appear even in listings.

       -historical
              toggles use of ">" or "-->" as a terminator for comments.

       -homepage=URL
              set homepage separate from start page.

       -image_links
              toggles inclusion of links for all images.

       -index=URL
              set the default index file to the specified URL.

       -ismap toggles  inclusion  of  ISMAP  links  when  client-side MAPs are
              present.

       -justify
              do justification of text.

       -link=NUMBER
              starting count for lnk#.dat files produced by -crawl.

       -list_decoded
              for -dump, show URL-encoded links decoded.

       -list_inline
              for -dump, show the links inline with the text.

       -listonly
              for -dump, show only the list of links.

       -localhost
              disable URLs that point to remote hosts.

       -locexec
              enable local program execution from local files  only  (if  Lynx
              was compiled with local execution enabled).

       -lss=FILENAME
              specify   filename   containing  color-style  information.   The
              default is lynx.lss.  If you give an empty filename, Lynx uses a
              built-in  monochrome  scheme  which imitates the non-color-style
              configuration.

       -mime_header
              prints the MIME header of a  fetched  document  along  with  its
              source.

       -minimal
              toggles minimal versus valid comment parsing.

       -nested_tables
              toggles nested-tables logic (for debugging).

       -newschunksize=NUMBER
              number of articles in chunked news listings.

       -newsmaxchunk=NUMBER
              maximum news articles in listings before chunking.

       -nobold
              disable bold video-attribute.

       -nobrowse
              disable directory browsing.

       -nocc  disable Cc: prompts for self copies of mailings.  Note that this
              does not disable any CCs which are incorporated within a  mailto
              URL or form ACTION.

       -nocolor
              force  color  mode off, overriding terminal capabilities and any
              -color flags, COLORTERM variable, and saved .lynxrc settings.

       -noexec
              disable local program execution.  (DEFAULT)

       -nofilereferer
              disable transmissions of Referer headers for file URLs.

       -nolist
              disable the link list feature in dumps.

       -nolog disable mailing of error messages to document owners.

       -nomargins
              disable left/right margins in the default style sheet.

       -nomore
              disable -more- string in statusline messages.

       -nonrestarting_sigwinch
              This flag is not available on all  systems,  Lynx  needs  to  be
              compiled  with  HAVE_SIGACTION defined.  If available, this flag
              may cause Lynx to react more immediately to window changes  when
              run within an xterm.

       -nonumbers
              disable    link-    and    field-numbering.     This   overrides
              -number_fields and -number_links.

       -nopause
              disable forced pauses for statusline messages.

       -noprint
              disable most print functions.

       -noredir
              prevents automatic redirection and prints a message with a  link
              to the new URL.

       -noreferer
              disable transmissions of Referer headers.

       -noreverse
              disable reverse video-attribute.

       -nosocks
              disable SOCKS proxy usage by a SOCKSified Lynx.

       -nostatus
              disable the retrieval status messages.

       -notitle
              disable title and blank line from top of page.

       -nounderline
              disable underline video-attribute.

       -number_fields
              force numbering of links as well as form input fields

       -number_links
              force numbering of links.

       -partial
              toggles display partial pages while loading.

       -partial_thres=NUMBER
              number  of  lines  to  render  before  repainting  display  with
              partial-display logic

       -passive_ftp
              toggles passive ftp connections.

       -pauth=ID:PASSWD
              set authorization ID and password for a protected  proxy  server
              at  startup.  Be sure to protect any script files which use this
              switch.

       -popup toggles handling  of  single-choice  SELECT  options  via  popup
              windows or as lists of radio buttons.

       -post_data
              properly  formatted  data  for  a post form are read in from the
              standard input and passed to the form.  Input is terminated by a
              line that starts with "---".

              Lynx  issues  an  HTTP POST, sending the form to the path or URL
              given on the command-line and prints the response of the server.
              If  no  path  or URL is given, Lynx sends the form to the start-
              page.

       -preparsed
              show HTML  source  preparsed  and  reformatted  when  used  with
              -source or in source view.

       -prettysrc
              show HTML source view with lexical elements and tags in color.

       -print enable print functions.  (default)

       -pseudo_inlines
              toggles pseudo-ALTs for inline images with no ALT string.

       -raw   toggles  default  setting of 8-bit character translations or CJK
              mode for the startup character set.

       -realm restricts access to URLs in the starting realm.

       -read_timeout=N
              Sets the read-timeout, where N is given in seconds.

       -reload
              flushes the cache on a proxy server  (only  the  first  document
              given on the command-line is affected).

       -restrictions=[option][,option][,option]...
              allows  a  list  of services to be disabled selectively.  Dashes
              and  underscores  in  option  names  can  be  intermixed.    The
              following list is printed if no options are specified.

              all
                 restricts all options listed below.

              bookmark
                 disallow changing the location of the bookmark file.

              bookmark_exec
                 disallow execution links via the bookmark file.

              change_exec_perms
                 disallow  changing the eXecute permission on files (but still
                 allow it for  directories)  when  local  file  management  is
                 enabled.

              default
                 same  as  command  line  option -anonymous.  Disables default
                 services for anonymous users.  Set to all restricted,  except
                 for:  inside_telnet, outside_telnet, inside_ftp, outside_ftp,
                 inside_rlogin,  outside_rlogin,  inside_news,   outside_news,
                 telnet_port, jump, mail, print, exec, and goto.  The settings
                 for these,  as  well  as  additional  goto  restrictions  for
                 specific  URL schemes that are also applied, are derived from
                 definitions within userdefs.h.

              dired_support
                 disallow local file management.

              disk_save
                 disallow saving to disk in the download and print menus.

              dotfiles
                 disallow access to, or creation of, hidden (dot) files.

              download
                 disallow some downloaders in  the  download  menu  (does  not
                 imply disk_save restriction).

              editor
                 disallow external editing.

              exec
                 disable execution scripts.

              exec_frozen
                 disallow the user from changing the local execution option.

              externals
                 disallow  some  "EXTERNAL" configuration lines if support for
                 passing  URLs  to  external  applications  (with  the  EXTERN
                 command) is compiled in.

              file_url
                 disallow  using  G)oto,  served  links or bookmarks for file:
                 URLs.

              goto
                 disable the "g" (goto) command.

              inside_ftp
                 disallow ftps for people coming from inside your domain (utmp
                 required for selectivity).

              inside_news
                 disallow  USENET  news  posting for people coming from inside
                 your domain (utmp required for selectivity).

              inside_rlogin
                 disallow rlogins for people coming from  inside  your  domain
                 (utmp required for selectivity).

              inside_telnet
                 disallow  telnets  for  people coming from inside your domain
                 (utmp required for selectivity).

              jump
                 disable the "j" (jump) command.

              multibook
                 disallow multiple bookmarks.

              mail
                 disallow mail.

              news_post
                 disallow USENET News posting.

              options_save
                 disallow saving options in .lynxrc.

              outside_ftp
                 disallow ftps for people  coming  from  outside  your  domain
                 (utmp required for selectivity).

              outside_news
                 disallow  USENET  news  reading and posting for people coming
                 from outside your domain  (utmp  required  for  selectivity).
                 This  restriction  applies to "news", "nntp", "newspost", and
                 "newsreply"  URLs,  but  not  to  "snews",  "snewspost",   or
                 "snewsreply" in case they are supported.

              outside_rlogin
                 disallow  rlogins  for people coming from outside your domain
                 (utmp required for selectivity).

              outside_telnet
                 disallow telnets for people coming from outside  your  domain
                 (utmp required for selectivity).

              print
                 disallow most print options.

              shell
                 disallow shell escapes and lynxexec or lynxprog G)oto's.

              suspend
                 disallow Unix Control-Z suspends with escape to shell.

              telnet_port
                 disallow specifying a port in telnet G)oto's.

              useragent
                 disallow modifications of the User-Agent header.

       -resubmit_posts
              toggles  forced  resubmissions  (no-cache)  of forms with method
              POST when the  documents  they  returned  are  sought  with  the
              PREV_DOC command or from the History List.

       -rlogin
              disable recognition of rlogin commands.

       -scrollbar
              toggles showing scrollbar.

       -scrollbar_arrow
              toggles showing arrows at ends of the scrollbar.

       -selective
              require .www_browsable files to browse directories.

       -session=FILENAME
              resumes from specified file on startup and saves session to that
              file on exit.

       -sessionin=FILENAME
              resumes session from specified file.

       -sessionout=FILENAME
              saves session to specified file.

       -short_url
              show very long URLs in the status line with "..."  to  represent
              the portion which cannot be displayed.  The beginning and end of
              the URL are displayed, rather than suppressing the end.

       -show_cfg
              Print the configuration settings, e.g., as read from "lynx.cfg",
              and exit.

       -show_cursor
              If  enabled  the  cursor  will  not  be hidden in the right hand
              corner but will instead  be  positioned  at  the  start  of  the
              currently selected link.  Show cursor is the default for systems
              without FANCY_CURSES capabilities.   The  default  configuration
              can  be  changed  in  userdefs.h  or lynx.cfg.  The command line
              switch toggles the default.

       -show_rate
              If enabled the transfer  rate  is  shown  in  bytes/second.   If
              disabled,  no  transfer  rate  is  shown.   Use  lynx.cfg or the
              options menu to select KB/second and/or ETA.

       -socks5_proxy=URL
              (Via which)  SOCKS5  proxy  to  connect:  any  network  traffic,
              including  all  DNS resolutions but the one for URL itself, will
              be redirected through the SOCKS5 proxy.  URL  may  be  given  as
              "proxy.example.com", "proxy.example.com:1080", "192.168.0.1", or
              "192.168.0.1:1080" (and  IPv6  notation  if  so  supported).   A
              SOCKS5  proxy may also be specified via the environment variable
              SOCKS5_PROXY.  This option controls the builtin SOCKS5  support,
              which is unrelated to the option -nosocks.

       -soft_dquotes
              toggles  emulation  of  the  old  Netscape  and Mosaic bug which
              treated ">" as a co-terminator for double-quotes and tags.

       -source
              works the same as  dump  but  outputs  HTML  source  instead  of
              formatted text.  For example

                  lynx -source . >foo.html

              generates   HTML   source  listing  the  files  in  the  current
              directory.  Each file is marked  by  an  HREF  relative  to  the
              parent  directory.   Add  a  trailing  slash  to make the HREF's
              relative to the current directory:

                  lynx -source ./ >foo.html

       -stack_dump
              disable SIGINT cleanup handler

       -startfile_ok
              allow non-http startfile and homepage with -validate.

       -stderr
              When dumping a document using -dump or  -source,  Lynx  normally
              does  not  display  alert  (error)  messages that you see on the
              screen in the status line.  Use the -stderr option to tell  Lynx
              to write these messages to the standard error.

       -stdin read the startfile from standard input (UNIX only).

       -syslog=text
              information for syslog call.

       -syslog_urls
              log requested URLs with syslog.

       -tagsoup
              initialize parser, using Tag Soup DTD rather than SortaSGML.

       -telnet
              disable recognition of telnet commands.

       -term=TERM
              tell  Lynx what terminal type to assume it is talking to.  (This
              may be useful for remote  execution,  when,  for  example,  Lynx
              connects  to  a remote TCP/IP port that starts a script that, in
              turn, starts another Lynx process.)

       -timeout=N
              For win32, sets the network read-timeout, where N  is  given  in
              seconds.

       -tlog  toggles  between  using  a  Lynx  Trace Log and stderr for trace
              output from the session.

       -tna   turns on "Textfields Need Activation" mode.

       -trace turns on Lynx trace mode.  Destination of trace  output  depends
              on -tlog.

       -trace_mask=value
              turn  on  optional  traces, which may result in very large trace
              files.  Logically OR the values to combine options:

              1  SGML character parsing states

              2  color-style

              4  TRST (table layout)

              8  configuration (lynx.cfg, .lynxrc,  .lynx-keymaps,  mime.types
                 and mailcap contents)

              16 binary string copy/append, used in form data construction.

              32 cookies

              64 character sets

              128
                 GridText parsing

              256
                 timing

              512
                 detailed URL parsing

       -traversal
              traverse  all http links derived from startfile.  When used with
              -crawl, each link that begins with the same string as  startfile
              is output to a file, intended for indexing.

              See CRAWL.announce for more information.

       -trim_blank_lines
              toggles  trimming of trailing blank lines as well as the related
              trimming of blank lines while collapsing BR tags.

       -trim_input_fields
              trim input text/textarea fields in forms.

       -underline_links
              toggles use of underline/bold attribute for links.

       -underscore
              toggles use of _underline_ format in dumps.

       -unique_urls
              check for duplicate link numbers in each page and  corresponding
              lists, and reuse the original link number.

       -update_term_title
              enables  updating  the title in terminal emulators.  Use only if
              your terminal emulator supports that escape code.  Has no effect
              when used with -notitle.

       -use_mouse
              turn  on  mouse  support, if available.  Clicking the left mouse
              button on a link traverses it.  Clicking the right mouse  button
              pops  back.   Click  on the top line to scroll up.  Click on the
              bottom line to scroll down.  The first few positions in the  top
              and  bottom  line may invoke additional functions.  Lynx must be
              compiled with ncurses or slang  to  support  this  feature.   If
              ncurses  is  used,  clicking  the  middle mouse button pops up a
              simple menu.  Mouse clicks may only work reliably while Lynx  is
              idle waiting for input.

       -useragent=Name
              set alternate Lynx User-Agent header.

       -validate
              accept  only  http  URLs  (for  validation).   Complete security
              restrictions also are implemented.

       -verbose
              toggle [LINK], [IMAGE] and [INLINE] comments with  filenames  of
              these images.

       -version
              print version information, and exit.

       -vikeys
              enable vi-like key movement.

       -wdebug
              enable  Waterloo  tcp/ip packet debug (print to watt debugfile).
              This applies only  to  DOS  versions  compiled  with  WATTCP  or
              WATT-32.

       -width=NUMBER
              number  of columns for formatting of dumps, default is 80.  This
              is limited by the number of columns  that  Lynx  could  display,
              typically 1024 (the MAX_LINE symbol).

       -with_backspaces
              emit  backspaces  in output if -dump'ing or -crawl'ing (like man
              does)

       -xhtml_parsing
              tells Lynx that it can ignore certain tags which have no content
              in an XHTML 1.0 document.  For example "
" will be discarded.

2 Commands
       More  than  one key can be mapped to a given command.  Here are some of
       the most useful:

       *   Use Up arrow and Down arrow to scroll through hypertext links.

       *   Right arrow or Return will follow a highlighted hypertext link.

       *   Left Arrow or "u" will retreat from a link.

       *   Type "H", "?", or F1 for online help and descriptions of key-stroke
           commands.

       *   Type  "k"  or  "K"  for  a  list  of the current key-stroke command
           mappings.

           If the same command is mapped to the same letter differing only  by
           upper/lowercase only the lowercase mapping is shown.

       *   Type Delete to view history list.

2 Environment
       In  addition  to various "standard" environment variables such as HOME,
       PATH, USER, DISPLAY, TMPDIR, etc, Lynx utilizes  several  Lynx-specific
       environment variables, if they exist.

       Others  may  be created or modified by Lynx to pass data to an external
       program, or for other reasons.  These are listed separately below.

       See also the sections on SIMULATED  CGI  SUPPORT  and  NATIVE  LANGUAGE
       SUPPORT, below.

       Note:   Not  all  environment variables apply to all types of platforms
       supported by Lynx, though most do.  Feedback on  platform  dependencies
       is solicited.

       Environment Variables Used By Lynx:

       COLORTERM           If set, color capability for the terminal is forced
                           on at startup time.  The actual value  assigned  to
                           the  variable  is  ignored.   This variable is only
                           meaningful  if  Lynx  was  built  using  the  slang
                           screen-handling library.

       LYNX_CFG            This  variable,  if  set, will override the default
                           location and name of the global configuration  file
                           (normally,   lynx.cfg)  that  was  defined  by  the
                           LYNX_CFG_FILE  constant  in  the  userdefs.h  file,
                           during installation.

                           See the userdefs.h file for more information.

       LYNX_CFG_PATH       If  set,  this  variable  overrides the compiled-in
                           search-list  of  directories  used  to   find   the
                           configuration  files,  e.g., lynx.cfg and lynx.lss.
                           The list is delimited with ":" (or ";" for Windows)
                           like the PATH environment variable.

       LYNX_HELPFILE       If set, this variable overrides the compiled-in URL
                           and configuration file URL for the Lynx help file.

       LYNX_LOCALEDIR      If set, this  variable  overrides  the  compiled-in
                           location  of  the  locale  directory which contains
                           native language (NLS) message text.

       LYNX_LSS            This variable, if set, specifies  the  location  of
                           the   default  Lynx  character  style  sheet  file.
                           [Currently only meaningful if Lynx was built  using
                           curses color style support.]

       LYNX_SAVE_SPACE     This  variable,  if  set, will override the default
                           path prefix for files saved to disk that is defined
                           in the lynx.cfg SAVE_SPACE: statement.

                           See the lynx.cfg file for more information.

       LYNX_TEMP_SPACE     This  variable,  if  set, will override the default
                           path prefix for temporary files  that  was  defined
                           during  installation, as well as any value that may
                           be assigned to the TMPDIR variable.

       MAIL                This variable specifies the default inbox Lynx will
                           check  for new mail, if such checking is enabled in
                           the lynx.cfg file.

       NEWS_ORGANIZATION   This variable, if set, provides the string used  in
                           the  Organization:  header of USENET news postings.
                           It will override the setting  of  the  ORGANIZATION
                           environment  variable,  if  it is also set (and, on
                           UNIX, the contents of an /etc/organization file, if
                           present).

       NNTPSERVER          If  set,  this  variable specifies the default NNTP
                           server that will be used for  USENET  news  reading
                           and posting with Lynx, via news: URL's.

       ORGANIZATION        This  variable, if set, provides the string used in
                           the Organization: header of USENET  news  postings.
                           On  UNIX,  it  will  override  the  contents  of an
                           /etc/organization file, if present.

       PROTOCOL_proxy      Lynx supports the use of proxy servers that can act
                           as firewall gateways and caching servers.  They are
                           preferable  to  the  older  gateway  servers   (see
                           WWW_access_GATEWAY, below).

                           Each  protocol  used  by  Lynx, (http, ftp, gopher,
                           etc),  can  be   mapped   separately   by   setting
                           environment  variables  of the form PROTOCOL_proxy.
                           Protocols are indicated in a URI by the name before
                           ":", e.g., "http" in "http://some.server.dom:port/"
                           for HTML.

                           Depending  on   your   system   configuration   and
                           supported   protocols,  the  environment  variables
                           recognized by lynx may include

                               cso_proxy
                               finger_proxy
                               ftp_proxy
                               gopher_proxy
                               https_proxy
                               http_proxy
                               newspost_proxy
                               newsreply_proxy
                               news_proxy
                               nntp_proxy
                               no_proxy
                               snewspost_proxy
                               snewsreply_proxy
                               snews_proxy
                               wais_proxy

                           See Lynx Users Guide  for  additional  details  and
                           examples.

       SOCKS5_PROXY        Is  inspected  if  -socks5_proxy  has not been used
                           (for the same content).

       SSL_CERT_DIR        Set   to   the   directory    containing    trusted
                           certificates.

       SSL_CERT_FILE       Set  to the full path and filename for your file of
                           trusted certificates.

       WWW_access_GATEWAY  Lynx still supports use of  gateway  servers,  with
                           the   servers  specified  via  "WWW_access_GATEWAY"
                           variables (where "access" is lower case and can  be
                           "http",  "ftp",  "gopher" or "wais").  However most
                           gateway servers have been discontinued.  Note  that
                           you do not include a terminal "/" for gateways, but
                           do  for   proxies   specified   by   PROTOCOL_proxy
                           environment variables.

                           See Lynx Users Guide for details.

       WWW_HOME            This  variable,  if  set, will override the default
                           startup  URL  specified  in   any   of   the   Lynx
                           configuration files.

       Environment Variables Set or Modified By Lynx:

       LYNX_PRINT_DATE     This  variable is set by the Lynx p(rint) function,
                           to  the  Date:  string  seen  in   the   document's
                           "Information  about"  page  (= cmd), if any.  It is
                           created for use by an external program, as  defined
                           in  a  lynx.cfg  PRINTER: definition statement.  If
                           the field does not  exist  for  the  document,  the
                           variable is set to a null string under UNIX, or "No
                           Date" under VMS.

       LYNX_PRINT_LASTMOD  This variable is set by the Lynx p(rint)  function,
                           to  the  Last  Mod:  string  seen in the document's
                           "Information about" page (= cmd), if  any.   It  is
                           created  for use by an external program, as defined
                           in a lynx.cfg PRINTER:  definition  statement.   If
                           the  field  does  not  exist  for the document, the
                           variable is set to a null string under UNIX, or "No
                           LastMod" under VMS.

       LYNX_PRINT_TITLE    This  variable is set by the Lynx p(rint) function,
                           to the Linkname:  string  seen  in  the  document's
                           "Information  about"  page  (= cmd), if any.  It is
                           created for use by an external program, as  defined
                           in  a  lynx.cfg  PRINTER: definition statement.  If
                           the field does not  exist  for  the  document,  the
                           variable is set to a null string under UNIX, or "No
                           Title" under VMS.

       LYNX_PRINT_URL      This variable is set by the Lynx p(rint)  function,
                           to   the   URL:   string  seen  in  the  document's
                           "Information about" page (= cmd), if  any.   It  is
                           created  for use by an external program, as defined
                           in a lynx.cfg PRINTER:  definition  statement.   If
                           the  field  does  not  exist  for the document, the
                           variable is set to a null string under UNIX, or "No
                           URL" under VMS.

       LYNX_TRACE          If set, causes Lynx to write a trace file as if the
                           -trace option were supplied.

       LYNX_TRACE_FILE     If set, overrides the compiled-in name of the trace
                           file,  which  is  either Lynx.trace or LY-TRACE.LOG
                           (the latter on  the  DOS/Windows  platforms).   The
                           trace  file  is in either case relative to the home
                           directory.

       LYNX_VERSION        This variable is always set by  Lynx,  and  may  be
                           used  by an external program to determine if it was
                           invoked by Lynx.

                           See also the comments in the distribution's  sample
                           mailcap file, for notes on usage in such a file.

       TERM                Normally,   this   variable  is  used  by  Lynx  to
                           determine the terminal type being  used  to  invoke
                           Lynx.  If, however, it is unset at startup time (or
                           has the value "unknown"), or if the -term  command-
                           line  option  is  used (see OPTIONS section above),
                           Lynx will set or  modify  its  value  to  the  user
                           specified  terminal  type  (for  the Lynx execution
                           environment).  Note: If set/modified by  Lynx,  the
                           values  of  the  LINES  and/or  COLUMNS environment
                           variables may also be changed.

2 Simulated Cgi Support
       If built with the cgi-links option enabled, Lynx allows access to a cgi
       script directly without the need for an http daemon.

       When  executing  such  "lynxcgi  scripts"  (if  enabled), the following
       variables may be set for simulating a CGI environment:

       CONTENT_LENGTH

       CONTENT_TYPE

       DOCUMENT_ROOT

       HTTP_ACCEPT_CHARSET

       HTTP_ACCEPT_LANGUAGE

       HTTP_USER_AGENT

       PATH_INFO

       PATH_TRANSLATED

       QUERY_STRING

       REMOTE_ADDR

       REMOTE_HOST

       REQUEST_METHOD

       SERVER_SOFTWARE

       Other environment variables are not inherited  by  the  script,  unless
       they   are   provided   via  a  LYNXCGI_ENVIRONMENT  statement  in  the
       configuration file.  See the lynx.cfg file, and  the  (draft)  CGI  1.1
       Specification 
       for the definition and usage of these variables.

       The CGI Specification, and other associated  documentation,  should  be
       consulted for general information on CGI script programming.

2 Native Language Support
       If  configured  and  installed  with Native Language Support, Lynx will
       display status and other messages in your local language.  See the file
       ABOUT_NLS  in  the  source distribution, or at your local GNU site, for
       more information about internationalization.

       The following environment  variables  may  be  used  to  alter  default
       settings:

       LANG                This  variable,  if  set, will override the default
                           message language.  It is an ISO 639 two-letter code
                           identifying  the  language.  Language codes are NOT
                           the same as the country codes given in ISO 3166.

       LANGUAGE            This variable, if set, will  override  the  default
                           message language.  This is a GNU extension that has
                           higher priority for  setting  the  message  catalog
                           than LANG or LC_ALL.

       LC_ALL              and

       LC_MESSAGES         These  variables,  if  set,  specify  the notion of
                           native language formatting style.  They are POSIXly
                           correct.

       LINGUAS             This  variable,  if  set  prior  to  configuration,
                           limits the installed languages to specific  values.
                           It  is  a space-separated list of two-letter codes.
                           Currently, it is hard-coded to a wish list.

       NLSPATH             This variable, if set, is used as the  path  prefix
                           for message catalogs.

2 Notes
       This is the manual for Lynx v2.9.0dev.5; development is in progress for
       2.9.0.

       If you wish to contribute to the further development of Lynx, subscribe
       to  our mailing list.  Send email to  with
       "subscribe lynx-dev" as the only line in the body of your message.

       Send bug reports, comments, suggestions to   after
       subscribing.

       Unsubscribe  by  sending  email  to   with
       "unsubscribe lynx-dev" as the only line in the body  of  your  message.
       Do not send the unsubscribe message to the lynx-dev list, itself.

2 See Also
       catgets(3),  curses(3),  environ(7),  execve(2),  ftp(1), gettext(GNU),
       localeconv(3),   ncurses(3),   setlocale(3),   slang(?),    termcap(5),
       terminfo(5), wget(GNU)

       Note that man page availability and section numbering is somewhat platform
       dependent, and may vary from the above references.

       A section shown as (GNU), is intended to denote that the topic  may  be
       available via an info page, instead of a man page (i.e., try "info subject",
       rather than "man subject").

       A section shown as (?) denotes that documentation on the topic  exists,
       but  is  not part of an established documentation retrieval system (see
       the distribution files associated with the topic, or contact your  System
       Administrator for further information).

2 Acknowledgments
       Lynx  has  incorporated  code  from a variety of sources along the way.
       The earliest versions of Lynx included code from Earl Fogel of  Comput-
       ing  Services at the University of Saskatchewan, who implemented HYPER-
       REZ in the Unix environment.  HYPERREZ was developed by Niel Larson  of
       Think.com  and  served  as  the  model  for the early versions of Lynx.
       Those versions also incorporated libraries from the Unix Gopher clients
       developed  at  the  University  of Minnesota, and the later versions of
       Lynx rely on the WWW client library code developed by  Tim  Berners-Lee
       and  the  WWW  community.  Also a special thanks to Foteos Macrides who
       ported much of Lynx to VMS and did or organized most of its development
       since  the  departures of Lou Montulli and Garrett Blythe from the Uni-
       versity of Kansas in the summer of 1994 through the release of  v2.7.2,
       and  to  everyone  on the net who has contributed to Lynx's development
       either directly (through patches, comments or bug reports) or indirect-
       ly (through inspiration and development of other systems).

2 Authors
       Lou  Montulli,  Garrett  Blythe, Craig Lavender, Michael Grobe, Charles
       Rezac
       Academic Computing Services
       University of Kansas
       Lawrence, Kansas 66047

       Foteos Macrides
       Worcester Foundation for Biomedical Research
       Shrewsbury, Massachusetts 01545

       Thomas E. Dickey